Maintenance - Hallins Newton 50 Manual Del Usuario

WARNING!
Never under any circumstances connect the lifting trolley to the mains when
cleaning.
.
Clean the lifting trolley by wiping the outside with a damp rag.
WARNING!
Never rinse the lifting trolley with water at any time!
IP 41

10 MAINTENANCE

In order for your lifting trolley to operate in the best possible way, it is important that you
perform regular maintenance as described below.

Remove the load from the load bed before starting maintenance work.

Inspections, service and repairs must be carried out by qualified personnel.
Document any checks and repairs in a register.
This comprises: Date of inspection or repairs, inspection status, executed repairs and
details on who has carried out the inspection or repair.
Daily
1. Check that the charger is not connected to the lifting trolley
2. Check that the lifting trolley's control unit and cable stand are not defective
3. Clean the lifting trolley according to cleaning instructions
Every month
1. Check all electrical connections and components and fix any damage and wear.
Replace with new parts where necessary.
2. Check the chassis, mast and load bed for any and all types of defects, cracks,
misalignment, corrosion etc., and that all locking devices are in place and correctly
attached.
3. Check that all wheels rotate freely and that the tyre rubber is intact. Lubricate the ball
bearings in the race.
4. Check that the wheel brakes are undamaged and work properly.
5. Check that the drive chain is undamaged.
6. Check that all stickers are legible and are in their right places.
7. Check that any strapping devices that may be used for the goods are intact and in
working order
8. Lubricate the inside of the mast with oil spray
12