Automatic Mode; To Repeat 1 Length Automatically; To Repeat 2 Lengths Automatically; To Repeat 3 Lengths Automatically - Better Packages VARIO 555eMA Manual De Instrucciones

Detailed operation

2.2.2 Automatic Mode

In the Automatic Mode, removing a piece of tape from the dispenser causes another
piece of tape to be dispensed automatically. Additionally, in the Automatic Mode, the
dispenser can remember up to three tape lengths and automatically dispense them in
the order in which they were entered.
Make sure that the last piece of tape dispensed has been removed. Press the <A>
button. The indicator will be illuminated (red).

2.2.2.1 To repeat 1 length automatically

Press the <15> button – a 15cm tape will be dispensed. Remove the tape and then
press the <REPEAT2/ENTER> button. Press the <REPEAT/START> button. A 15cm
piece of tape will be dispensed – remove it and another 15cm piece of tape will be
dispensed automatically.

2.2.2.2 To repeat 2 lengths automatically

First make sure the memory is clear of any lengths previously stored. To do this,
press <A>, the indicator turns off. Remove any piece of tape that may have been
dispensed but not removed. Press <A> again. The indicator lights (red) and the
memory is cleared and ready for your input.
Press the <15> button - a 15cm tape will be dispensed. Remove the tape and then
press the <REPEAT2/ENTER> button. Now press the <25> button – a 25cm tape will
be dispensed. Remove the 25cm piece of tape and then press the
<REPEAT2/ENTER> button. Press the <REPEAT/START> button. A 15cm piece of
tape will be dispensed. Remove the 15cm piece of tape and a 25cm piece will
automatically be dispensed. Removing the 25cm piece will then automatically
dispense a 15cm piece.

2.2.2.3 To repeat 3 lengths automatically

First make sure the memory is clear on any lengths previously stored (see above).
Press the <15> button – a 15cm tape will be dispensed. Remove the 15cm tape and
then press the <REPEAT2/ENTER> button. Now press the <25> button – a 25cm
piece of tape will be dispensed. Remove the 25cm piece of tape and then press
<REPEAT2/ENTER> button. Now press the <35> button – a 35cm piece of tape will
be dispensed. Remove the 35cm tape and press the <REPEAT2/ENTER> button.
Press the <REPEAT/START>. A 15cm piece of tape will be dispensed and as each
successive piece is removed the unit automatically continues to dispense in the
correct sequence:...15, 25, 35, 15, 25, 35...

2.2.2.4 Modified lengths

In the Automatic Mode, tape lengths modified using these buttons can be used in the
above instructions in place of simple number buttons.
HADE VARIO 555eMA page 6