Lenco DIR-200 Manual Del Usuario página 23

5.6. 5.6. DAB DAB
5.6. DAB 5.6. DAB
DAB mode receives DAB/DAB+ digital radio and displays information about
the station, stream and track playing.
5.6.1. Scanning for stations
The first time you select DAB radio mode, or if the station list is empty,
the device will automatically performs a full station scan. You may also
perform a scan manually to update the list of stations for the following
possible reasons:
o
o
o
To start a scan manually, choose Full scan. To scan only stations with
good signal strength, select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune
invalid.
Turn the Navigation Control on the device to view a list of stations
and press OK to confirm. The screen will show information of the
selected station, track or shown as broadcast.
5.6.2. Presets
To store a DAB+ preset, press and hold PRESET
the remote control until the display shows the Save preset screen.
Select one of the 10 presets to save the current station.
To select a preset, press PRESET
Available stations might change from time to time.
An empty or incomplete list of available stations might be
resulted from poor reception during the scan.
To store the stations with good signal strength in the list only.
PRESET PRESET
PRESET on the device or
PRESET
PRESET on the device or PRESET
23
on
on the remote