Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Place and fix the oven
•
To place the oven in the cabinet, it is recommended that there be at least
two people.
•
Check that the oven frame and the front edge of the cabinet coincide
evenly.
•
The power cord must not be under the oven, caught between the oven
walls and the cabinet, or remain bent.
•
To fix the oven to the cabinet use the supplied screws. The screws must be
positioned as indicated in Figure 5, passing them through the plastic
supports fixed to the oven frame. Do not overtighten the screws as you
may damage the plastic brackets.
•
Once the oven is attached to the cabinet, check that it remains properly
attached and does not move.
ELECTRICAL CONNECTION OF THE OVEN
The oven must be installed by a licensed electrician or suitably
qualified technician.
Before connecting the oven to the mains, check that:
1. The electrical installation where the oven is to be connected must be
adequate for the power consumed by the oven.
2. The voltage must correspond to the nominal value specified in the
characteristics described in this manual.
3. The section of the power cables must withstand the current specified
on the specifications plate.
16
Fig. 5
Tabla de contenido
