Tabla de contenido
RC 827D
RC 821 D
COMMAND
2
1
7
8
9
1. Power ON Radio/Standby/Alarm Off button
2. SLEEP button
3.
TIME SET button
4. PRE/ M+ button
5. TUN-/ HOUR button, previous radio stations/hour setting
6. TUN+/ MIN button, next radio stations/minute setting
7. SNOOZE button
8. Alarm 1 Radio/Buzer indicator
9. Display
10. VOL -/Alarm1 button, volume control/ Set alarm 1
11. VOL+/Alarm2 button, volume control/ Set alarm 2
12. Battery compartment
13. Alarm 2 Radio/Buzer indicator
14. SLEEP indicator
INSTALLATION
Insert the plug of the power cable into a power outlet 230V
To keep the clock and the time memorization running even during a momentary
power failure, insert two AAA batteries (not supplied) into the appropriate
compartment (12) on the bottom of the appliance, following the polarity
indications printed on the mobile.
CLOCK ADJUSTMENT
1. You must turn off the radio before you set the clock time;
2. Press and hold the
TIME SET
Then release the button;
3. Press the Hour (5) and Minute (6) buttons to adjust the hour and minute;
4. Press the
TIME SET
Button (3) to confirm the time setting.
Note: if during the adjustment phase (display flashing) no key is pressed for a
certain time, the alarm clock automatically returns to standby (fixed display)
RADIO
1. Turn On the radio by pressing the Power ON button (1); press it again to
turn it Off;
2. Tune into your favorite station by selecting the right frequency with the
TUN+ (5) and TUN- (6) buttons. During the operation, the tuned frequency
is shown on the display;
- Long press the TUN+ (5) and TUN- (6) buttons to activates the automatic
search, the radio scans the frequency until it stops at the first radio station
found.
- Press the TUN+ (5) and TUN- (6) buttons several times to fine tune
(step by step).
8
8
8
FM ALARM CLOCK
FM ALARM CLOCK
3 4
5 6
13
14
Button (3) until the display begins to blink.
Listening to stored radio stations and how storing a radio station
It is possible to store up to 10 radio stations:
1. Select the desired frequency;
2. To save a radio station in memory:
- Long press
- Press TUN- /HOUR (5) and TUN+/MIN (6) keys to select the memory
location;
10
- press
PRE/ M+
11
radio station is now saved;
3. To listen to a radio station saved in memory, press the PRE/M+ button
(4) until the desired memory number is displayed.
VOLUME ADJUSTMENT
12
While listening to the radio, press the VOL+ (11) and VOL- (10) buttons to
adjust the listening volume.
SETTING THE ALARM
1. In Standby mode, press and hold the setting button alarm 1 "Alarm1"
(10) until the time display starts flashing
2. Press Hour (5) and Min (6) buttons, for adjust the hour and minutes in
which to activate the alarm clock;
3. Press the Alarm1 button (10) to confirm the set time;
4. Press the Alarm1 button (10) several times to select the type of ringtone
(Radio, Buzzer or deactivation). The LED (13) on the alarm symbol
indicates the buzzer ringtone; the LED (13) on the radio symbol indicates
the radio ringtone. No symbol indicates that the alarm is deactivated.
Follow the same steps above to set alarm 2 using the Alarm2 buttons.
The volume and the station played by the radio alarm will be the one
set during the last listening to it.
TURNING OFF THE ALARM
If you wish to switch the alarm off temporarily, press the SNOOZE button (7);
the interruption lasts 9 minutes, after which the alarm is switched on again.
50Hz.
The operation can be repeated several times within an hour.
Press Power ON button (1) to stop the alarm. The alarm will operate 24
hours later as per alarm set.
To cancel the alarm, press the Alarm1 (10) or Alarm2 (11) until all the alarm
indicators (13) is off. The alarm setting is cancelled.
SLEEP FUNCTION
The SLEEP button (2) allows you to program the automatic turning off of
the radio up to a maximum of 90 minutes.
Set the switch-off time by pressing the SLEEP button (2) several times;
initially the maximum time of 90 minutes will be shown, by pressing the
SLEEP button (2) several times, this time will be lowered in 10 minute steps
until the word OFF appears (SLEEP function deactivated).
TECHNICAL SPECIFICATIONS
Power supply: .................................................................230V
Buffer batteries (not supplied): ..............................2 "AAA"x 1.5V batteries
FM frequency range: .......................................................... 87.5-108MHz
Consumption: ....................................................................................5W
Dimension: ................................................................ 140*109,5*60 mm
Weight: ......................................................................................... 300 gr
PRE/ M+
button (4) until the display begins to blink;
button (4) again to confirm the memorization. The
ENGLISH
50Hz
Tabla de contenido
