Location Requirements; Window Installation - Haier HWE15XCR-L Guía De Uso Y Cuidado

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct installation.
The site of installation should provide:
A grounded electrical outlet within 6 ft. (183 cm) of where the power cord exits the air
conditioner.
NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
ree movement of air in the room to be cooled.
rge enough opening for the air conditioner.
ot be installed in a through-the-wall sleeve.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers.

WINDOW INSTALLATION

Window opening measurements: (See
HWE15XCR-L, HWE18VCR-L, HWE24VCR-L
A. Width
B. Height
WARNING
azard
to a mating, grounded 3 prong outlet.
ot remove the ground prong from the power supply cord.
ot use a plug adapter, extension cord, surge protector, or multi-outlet adapter
re to follow these instructions can result in injury re, or electrical shock.
PAGE 6
All manuals and user guides at all-guides.com
1)
29-1/2" - 39"
19-1/8"
INSTALLATION REQUIREMENTS
Fig. 1
A-WIDTH