AMAZON COMMERCIAL B07SRXJF1W Guía De Bienvenida página 11

Operation
Step 2: Running the Pump
•
Plug the power cord into a GFCI-protected electrical outlet and press the power
switch to the On position. If the pump does not pump water within 2 minutes,
turn the pump off. Refill with clean water and make sure all connections are
airtight.
To turn the pump off, press the power switch to the off position.
•
• Risk of electric shock. Always disconnect the electrical supply
DANGER
before attempting to install, service, or perform any maintenance. Failure to do
so could result in fatal electrical shock. Only qualified electricians should repair
this unit. Improper repair could result in fatal electrical shock.
11