Filter Reset; Setting The Temperature; Switching The Appliance On; Refrigerator Drawer - Thermador T24UC925DS Manual De Uso Y Cuidado

The factory setting is degrees Fahrenheit. When
changing to degrees Celsius (°C) the display will show
°C until switched back. When switching back to
degrees Fahrenheit (°F) the display will show °F.
I.
QUICK CHILL
Press the button once to activate. The LED indicator will
illuminate and the unit will set to the QUICK CHILL
temperature of 33°F (0°C) for the refrigerator (UPPER)
drawer and -5°F (-21°C) for the freezer (LOWER)
drawer. After 24 hours, or if the QUICK CHILL button is
pressed again, the unit returns to its previous settings.
NOTE:
All other temperature control buttons are locked
while the unit remains in QUICK CHILL mode.
J.
Temp mode
Press Temp mode to cycle through the 3 temperature
levels, setting your appliance to temp mode 1 by default
has a set point of 34°F ( 1°C) for the upper drawer and
-5°F (-21°C) for the lower drawer, for temp mode 2 the
default is 37°F (3°C) for the upper and 0°F (-18°C) for
the lower drawer, and for temp mode 3 the default is at
44°F (6°C) for the upper drawer and 3°F (-16°C) for the
lower drawer.
You can adjust the temperatures manually for each
drawer independently while in temp mode 1 and 2 with
the temperature selection buttons (-) (+) between the
following temperatures for each temp mode:
Temp Upper drawer
mode range
1 33°F ~ 35°F
(1°C ~ 2°C)
2 36°F ~ 40°F
(2°C ~ 4°C)
3 41°F ~ 47°F
(5°C ~ 8°C)
Once the appliance enters temp mode 3 the controls for
the lower drawer control will be locked and will increase
or decrease only when changing the temperature for the
upper drawer.
K.

FILTER RESET

When the LED indicator is illuminated, press and hold
the FILTER button for 3 seconds to reset the filter hour
counter. See Water Filter on pg. 12.

Setting the temperature

By default, the temperature set in your Refrigerator is:
37°F ( 3°C) for the upper drawer and 0°F (-18°C) for the
lower drawer.You can adjust the temperature to your
liking using the SELECTION BUTTONS or the TEMP
MODE button.
Lower drawer
range
-8°F ~ -2°F
(-22°C ~ -14°C)
-1°F ~ 1°F
(-22°C ~ -14°C)
2°F ~ 6°F
(-17°C ~ -14°C)
To set a new temperature press the SELECTION
BUTTONS: (-) or (+).
The temperature will increase or decrease by one
degree every time the SELECTION BUTTON is
pressed.
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F). The factory setting is
degrees Fahrenheit (°F).

Switching the appliance on

The appliance begins to cool when plugged in.
WARNING:
Follow the instructions and recommendations in the
"Connecting the appliance" section in the Installation
Guide for a correct and safe use of your Double Drawer
Refrigerator.
• The interior drawer light(s) turn on when either drawer
is opened.
The unit is preset to the following factory recommended
temperature settings: 37°F ( 3°C) for the upper drawer
and 0°F (-18°C) for the lower drawer.

Refrigerator Drawer

WARNING:
To avoid risk of explosion, do not store explosive
substances in the appliance.
When purchasing food, please note:
The "purchase freshness" is important for the shelf- life
of your food. When buying food, always pay attention to
the degree of freshness. Spoiled food or food close to the
expiration date will decay faster even refrigerated and
may contaminate the drawer with unpleasant odors.
Arranging food in the appliance
• Wrap or cover food before placing in the appliance. This
will retain the aroma, color and freshness of the food. In
addition, flavors will not be transferred between foods
and the plastic parts will not become discolored.
• Allow warm food and drinks to cool down before placing
in the appliance.
• Do not block air outlet/inlet openings with food in the
refrigerator compartment, otherwise the air circulation
will be impaired. Food which is stored directly in front of
the air outlet openings may be frozen by the cold air
flowing out.
• Avoid contact of oil and fat with the plastic parts
and door seal.
Page | 9