Pairing A Gps Navigator With The - Caberg JUST SPEAK Instrucciones De Uso

3 FUNCTIONS
UK
AVRCP (Audio Video Remote Control Profile) protocol, enabling music to
be interrupted and restarted. If the music player with A2DP does not fea-
ture the AVRCP protocol, it may not be possible to restart music from the
CABERG JUST SPEAK system (it can still be stopped, however). In this
case, restart the music manually on the music player.
Connect A2DP Press and hold + button for 2 seconds (tone).
music player When connected, some players start music au-
tomatically.
Start music (Play) Press the
must already be connected.
Pause function When the player is connected and music is
(Pause) playing, press
Next track When the player is connected and playing
(Forward)
music, press and hold
seconds (tone).
Previous track When the player is connected and palying
or track start music, press and hold - button for about 2
(Backward) seconds (tone).
Interrupt music and Press and hold - button for 3 seconds (double
disconnect player tone). The music stops and the A2DP player is
disconnected. Note: if the A2DP player is on a
cellphone, the phone connection remains active
even if the music player is disconnected.
Attention: Obey all road traffic laws. Both hands should be
used to control the motorcycle when riding. All operations
on the CABERG JUST SPEAK system should be carried
out while the motorcycle is stationary.
46
ENGLISH
button briefl y (tone). The player
button briefl y (tone).
+ button for about 2
Note: It is not possible to connect a music player with A2DP and another
CABERG JUST SPEAK system (intercom mode) at the same time. Inter-
®
rupt the Bluetooth intercom manually by pressing the
ly before starting the A2DP player. To re-establish Bluetooth
communications, stop the music by pressing - for 3 seconds then con-
nect the intercom manually by pressing the
3.5 GPS NAVIGATORS
3.5.1 Pairing a GPS navigator with the CABERG JUST
SPEAK system
The navigator/CABERG JUST SPEAK pairing operation is managed on
the navigator. Consult the handbook for the navigator with Bluetooth
interface, in the section dealing with connecting Bluetooth
check the pairing procedure, as this is different for every navigator. Then
use the navigator to pair the navigator and CABERG JUST SPEAK system.
The process is the same as that described in the paragraph above ("3.2.1
Pairing with a Bluetooth® cellphone"), so repeat the actions described in
points 1 to 8, using the GPS navigator rather than the cellphone. Once the
CABERG JUST SPEAK system is connected to the Bluetooth
the CABERG JUST SPEAK system can receive GPS information. If the
pairing is not successful, switch off the CABERG JUST SPEAK system and
repeat the pairing operation from the start.
Note: the functions described can vary according to the type of
navigator or software. This could affect compatibility with the CABERG
JUST SPEAK system.
To use the CABERG JUST SPEAK system connected to a GPS navigator,
proceed as follows:
1 - Switch off the CABERG JUST SPEAK system.
2 - Switch on the previously paired satellite GPS device.
UK
button brief-
®
intercom
button briefly).
®
® devices, to
®
navigator,
47
ENGLISH