Using Instructions - EAS ELECTRIC EMH750CGB Manual

using instructions

Warnings
■ Do not modify this appliance.
■ This appliance must be installed by an authorised
technician or installer.
■ Prior to installation, ensure that the local
distribution conditions
pressure) and the adjustment of the appliance are compatible
■ The adjustment conditions for this appliance are stated on
the label (or data plate).
■ This appliance is not connected to a combustion products
evacuation device. It should be installed and connected in
accordance with the current installation regulations. Particular
attention should be given to the relevatn requirements regardin
ventilation.
■ Before installing, turn off the gas and electricity supply to the
appliance.
■ All appliances containing any electrical components must be e
arthed.
■ Ensure that the gas pipe and electrical cable are installed in su
ch a way that they do not touch any parts of the appliacne which
may become hot.
■ Gas pipe or connector shouldn't be bent or blocked by any
other appliances.
■ Check the dimensions of the appliance as well as the
dimensions of the gap to be cut in the kitchen unit.
■ The panels located above the work surface, directly next to the
appliance, must be made of non-flammable material. Both the
stratified surfacing and the glue used to secure it should be heat
resistant, to prevent deterioration.
■ Turn on appliance tap and light each burners.
Check for a clear blue flame without yellow tipping.
If burners shows any abnormalities check the following :
- Burner lid on correctly
- Flame spreader positioned correctly
- Burner vertically aligned with injector nipple
nature of the gas and gas
(
17
V.2