ULTTY SKJ-CR018H Manual Del Usuario página 8

5
Heating Mode Instructions
Press the warm mode button and the display shows the ambient
temperature.
Press temperature button to set the temperature, and the display
will flash digitally, which can be set to 1-30 °C.
Set temperature should be higher than the ambient temperature,
so that the heating function will be turned on;
When the ambient temperature reaches the set temperature, the
heating function will stop and keep run for 40s, then turn to
standby mode;
The ambient temperature is lower than the set temperature and
the heating function will automatically activate.
Set temperature > ambient temperature: heating function on.
Set temperature
Note: The default setting temperature is 25 °C. In the warm mode,
when the ambient temperature is below 0 °C, the display only
shows 01, do not display negative temperature value. The warm
air mode run over 9 hours, the machine will automatically stop
running. Restart by pressing the host power button or by using the
remote control.
Warm mode: use remote to set temperature, host does not support this operation.
Ambient
Temperature
18℃
≤ ambient temperature: heating function stops
Set
Temperature
20℃