ULTTY SKJ-CR018H Manual Del Usuario página 6

The device can be switched on and off by pressing the
"ON & OFF" button
Press Sleepmode button on the remote control.
The display shows L and the wind speed become minimum.
Press again to exit the sleep mode.
(You can also exit the current mode by pressing the Wind Strength + button.)
Press Strongmode button on the remote control.
The display shows H and the wind speed become max.
Press again to exit the sleep mode.
(You can also exit the current mode by pressing the Wind Strength + button.)
Press the Oscillation button to turn on the oscillation function.
This fan can swing left and right 80.Press this button again to
stop oscillating.
Press button to turn off tone of fan.The fan cancel"didi"
sound.
Press this button to activate the cooling mode.
Note: The default start mode is the cooling mode.
Press the "+" button on the left side of the remote control
to increase the volume of air, press the "-" button on the
left side of the remote control to decrease the airflow.
Cool mode can be used for 9-level settings,
warm mode can be set for 4 levels.
Press this button to activate the warm mode.
Note: In warm mode there is no strong mode and sleep mode.
In warm mode, press the temperature button on the right side
of the remote control to set the temperature. Note:this button
does not work in cool mode.
Press the timer button on the remote control to set 1 to 8 hours
of timing.