Troubleshooting Table; Troubleshooting Tips - SNOWJOE SUNJOE SWJ807E Manual Del Operador

Chain Sprocket
Regularly check the condition of the sprocket and replace it
when wear exceeds 0.5 mm (Fig. 33).
Do not mount a new chain with a worn sprocket or vice-versa.
Fig. 33
Troubleshooting

Troubleshooting Tips

Most difficulties are easy to fix. Consult the troubleshooting
table for common problems and their solutions. If you continue
to experience problems or need repairs beyond these minor
adjustments, please call 1-866-SNOWJOE (1-866-766-9563)
for assistance.
m
WARNING!
Always unplug the power cord before
performing any adjustments, maintenance, or repairs to your
2-in-1 pole + chain saw.
< 0.5 mm

Troubleshooting Table

Problems Corrective Action
•
The saw
Check that you installed the extension cord
motor fails
properly into the saw power cord receptacle and
to start
that you plugged the extension cord into a live
120 V outlet.
•
Make sure that you fully depress and hold the
safety lock button before squeezing the ON/OFF
trigger switch.
The saw
runs, but
•
The chain is too tight; re-tension.
the chain
speed is
low
Bar and
•
The chain tension is too tight; re-tension.
chain
•
The chain oil tank is empty; refill.
running
hot and
•
The lubrication holes are plugged; clean them out.
smoking
The saw
motor •
The chain tension is too tight; re-tension.
runs, but
•
The guide bar or chain is damaged; inspect
the chain
and replace the damaged part.
is not
turning
Daily Checklist, Cleaning
and Storage
Daily Checklist
To help maintain your electric 2-in-1 pole + chain saw for
optimum performance, we recommend you complete this
checklist prior to each work session.
m
WARNING!
Do not plug in the power cord until you
have completed all of the daily checks.
• Inspect for any visible damage to the chain, guide bar, or
motor housing.
• Inspect the oil port and guide bar rails and clean them to
remove any debris.
• Check the chain tension.
• Check the chain teeth for sharpness.
• Check the bar and chain oil level; fill with only new chain
oil specifically formulated for chain saws.
18