Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For the 1071/13 module:
Resistive loads
16 A
3680 W
—
Four local buttons are available on all relay modules for direct output activation, useful during system
testing and/or configuration
—
Refer to the instruction booklets of each module for more information.
LoGiCAL FEATurES
—
No programming needed. In all cases, the kit can be reconfigured as required using IPerSet software
via USB (use of a 1071/56 is required).
—
Six logical addresses of the available 254 are used:
•
1 and 2
for the 2 eight-input modules for 1071/18 buttons
•
30
for the 1 seven-input on DIN rail module 1071/7
•
50 and 51
for the two four-output 16 A through modules 1071/14
•
80
for the four-output 16 A relay module 1071/13
—
Only three of the possible 40 actions are used for each output point. In particular, three actions are
used: toggle, on, off.
MECHAniCAL FEATurES
—
Refer to the specific instruction booklets for the mechanical features of each module in the kit.
—
Reference standards:
DS1071-09
Controllable loads, 220-240 V~ (distributed on each relay)
Incandescent
lamps
10 A
2300 W
EN 50090-2-2
EN 50428
EN 60669-2-1
EN 60669-1
Fluorescent and
energy-saving
lamps
4 AX
920W
Electronic
Ferromagnetic
transformers
4 A
920W
transformers
4A
920 VA
13
Tabla de contenido
