Worx Professional WU527 Manual Del Usuario página 10

with 1/4 turn more than finger tight.
- Take care that the mounting positions of the inner flange (18)
and outer flange (20) are correct.
- When mounting: Ensure that the cutting direction of the teeth
(direction of arrow on saw blade) and the direction-of-rotation
arrow on the blade guard match.
5 HEX KEY STORAGE (See Fig.B)
The hex key provided can be placed in the area under the machine
motor.
6
DUST/CHIP EXTRACTION (See Fig.E)
Fasten the vacuum adapter (15) onto the dust extraction outlet
(28) until it latches. Directly connect a suitable vacuum hose to the
adapter.
Note: There is an arrow on the surface of the adapter which show
the tighten direction.
- The vacuum adapter must not be mounted when no external
dust extraction is connected. Otherwise there is danger of the
extraction system becoming clogged.
Clean the vacuum adapter regularly to ensure optimum dust
extraction. The vacuum cleaner must be suitable for the material to
be worked.
BEFORE PUTTING INTO OPERATION
1) BATTERY CHARGING
A battery that is new or has not been used for a longer period does not
develop its full capacity until after several charging / discharging cycles.
A significantly reduced working period after charging indicates that the
batteries are used and must be replaced.
All manuals and user guides at all-guides.com
10
2) TO REMOVE OR INSTALL BATTERY PACK (See Fig.A)
Locate latches on side of battery pack and depress both sides to
release battery pack from your tool. Remove battery pack from your
tool. After recharge insert the battery pack into the battery port. A
simple push and slight pressure will be sufficient.
STARTING OPERATION
1) SWITHCING ON AND OFF
For starting operation the machine, actuate the lock-off button (1) first,
and then press and hold the On/off switch (2) afterwards.
To switch off the machine, release the On/off awitch(2).
For safety reasons the On/Off switch of the machine
cannot be locked; it must remain pressed during the entire
operation.
2) ELECTRICAL BRAKE
An integrated electrical brake immediately reduces the speed of the
saw together with the saw blade after switching off the machine.