Uline H-1188 Guía Rápida

H-1188
TWO-TIER CARTON STAND
TOOLS NEEDED
Wrench
Rubber Mallet
(for optional casters)
NOTE: H-1074 optional casters can be ordered separately.
Platform x 2
1. Identify and lay out all parts
for assembly.
2. Using screws, secure the end
uprights to the lower platform.
Tighten only one screw
at each corner to ensure
uprights are level and stable.
Then tighten the second
screw. (See Figure 1)
3. Repeat step 2 for the upper
platform. (See Figure 2)
PAGE 1 OF 3
1-800-295-5510
uline.com
Upper Carton Lower Carton
Divider x 4 Divider x 4
Figure 1
Figure 2
Phillips Screwdriver
PARTS
End Upright x 2
ASSEMBLY
4. Insert the carton dividers into
the holes along the edge of
the platforms. Use 14" dividers
in upper, 20" dividers in lower.
Attach washer and lock nut
to the threaded ends of the
carton dividers. (See Figure 3)
OPTIONAL CASTERS (H-1074)
1. Remove rubber feet from the
end of the uprights and insert
optional casters. Casters will
click once inserted.
(See Figure 4)
2. Fully secure casters with
rubber mallet until flush with
the end of the upright.
NOTE: Metal stem should
not be visible if fully
inserted.
Para Español, vea página 2.
Pour le français, consulter la page 3.
Caster x 4 (Optional)
Phillips Screw x 16
Model #H-1074
Lock Nut x 16 Washer x 16
Figure 3
Figure 4
0821 IH-1188