Idiomas disponibles
Idiomas disponibles
Recommend 2-person assembly.
1.
When shop desk is upright, remove hardware from
one of the back legs. (See Figure 1)
NOTE: Do not remove hardware from the other
leg until instructed to do so.
2. Align and attach uprights to leg and desk top using
four long bolts and four flange nuts included in the
upright hardware kit. (See Figure 2)
NOTE: Make sure the two cutouts on upright are
facing front of desk.
3. Repeat steps 1 and 2 for other back leg.
PAGE 2 OF 6
INSTRUCTIONS
4. Line up holes on panel to the four holes on each
upright. Attach panel to uprights using eight short
bolts and eight flange nuts. (See Figure 3)
Figure 1
5. Line up shelf brackets with uprights and secure to
uprights with four short bolts and four flange nuts.
(See Figure 4)
Figure 2
6. Place shelf on brackets. Install to brackets with four
short bolts and four flange nuts. (See Figure 5)
Upright
Cutouts
7.
Recheck all bolts and nuts for tightness.
1-800-295-5510
uline.com
Shelf Bracket
Flange Nuts
Shelf
Figure 3
Short Bolts
Upright
Figure 4
Short Bolts
Flange
Nuts
Figure 5
0321 IH-6865
