Installing Batteries in the Remote Control
1.
Slide the cover out completely.
2.
Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn't work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Operation
Turning the TV On and Off
Press the POWER
You can also use the POWER
Changing Channels
Using the Channel Buttons:
1.
Using the Number Buttons:
1.
Using the PRE-CH Button to select the Previous Channel:
1.
button on the remote control.
button on the front of the panel.
Press the CH
or CH
button to change channels.
CH
or CH
When you press the
You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels).
You will not see channels that were either erased or not memorized.
Press the number buttons to go directly to a channel.
To select channel 108, press "
"
When you use the number buttons, you can directly select channels that were either erased or not memorized.
To change the channel faster, press the channel buttons, then ENTER
(For channel "4" press "4", then "ENTER
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use the number button to
select the second channel. Then use the PRE-CH button to quickly alternate between them.
English-6
button, the TV changes channels in sequence.
"
"
"
".
.
")