ATH-Heinl ATH-W Manual De Instrucciones página 72

During the measurement process, firstly move the
plunge to the first point and then, after a brief
wait, it can be moved to the second point.
The [A]; [B]; [D] and [De] data is then
automatically recorded by the machine.
WARNING:
In order to balance in ALUS mode, the programme
does not need to be selected in advance.
In order to balance in ALU2 mode, the programme
must be selected in advance.
c) Starting the balancing process
/
Start the balancing process using the F1button
or by closing the wheel protector
Turn the wheel until the weight is at the 12
o'clock position. This activates the automatic
brake.
This can be deactivated at any time by pressing
the F3 button.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
- 11 -