Operation; Operating Instructions; Emergency Number - ATH-Heinl ATH-W Manual De Instrucciones

3.0

OPERATION

3.1

Operating Instructions

Company:
Place of work:
Operation:
Risks to People and the Environment
Noise danger
•
Danger of being caught on machine
•
Danger due to uncontrolled moving parts
•
Danger from charged dust in the brake system
•
Protective Measures and Rules of Conduct
• Wear close-fitting clothes
• Do not wear a watch, rings, chains or similar jewellery when working
• Wear ear protection and safety goggles.
• Longer hair should be secured by a hair net or other measure
• Only use impact wrenches that don't blow air on the wheel rim.
• Clean wheels and tyres only when wet to avoid dust build-up; if possible, use wheel washing
systems.
• Remove dust on the brake drums with an extraction bell with suitable industrial vacuum cleaners.
Use category U equipment for asbestos-free dusts and category K1 for asbestos-containing dusts.
(Observe current GUV regulations)
• Damaged tyres must not be used.
• When inflating the tyre, set up a guard to catch any flying parts. Keep people out of the danger area.
Tyre filling must be monitored and the maximum permissible assembly air pressures must not be
•
exceeded.
Only operate motor-driven wheel balancers with a protective hood.
•
For large wheels of trucks and self-driving machines:
•
-
-
Response to faults and hazards
• Machine defects must be reported to the manufacturer immediately
• Switch off the machine and secure against unauthorised restart
• Damage should only be repaired by qualified personnel
First Aid
• Inform first aiders (see alarm/emergency plan).
Treat injuries immediately.
•
• Enter into the accident book
Contact emergency services for serious injuries.
•
Maintenance
• Repair only by instructed and trained persons
Disconnect or secure the machine from the mains power supply for set-up, adjustment,
•
maintenance or servicing
•
Clean the machine after operation is ended
Annual check of the machine by an authorised and trained person
•
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10
Operating Instructions
Tyre Servicing
On machines with vertical wheels, work with heavy tyres (for example, EM tyres) must be
carried out by two people.
For tyres with a diameter >1.4 m or a weight >200 kg, fall-protection devices must be used.

Emergency number:

Ambulance service: _______________
for
_____________
- 39 -
Date:
Signature: