Felisatti DC10/14,4L2 Manual De Uso página 9

1) Charging indication
overheated)
2) If charging of the heated battery is attempted
immediately after it has been used or charged,
the cooling, indication changes to red glowing and
3) This charger detects charging status of the
battery and always keeps the battery in full charge
3. Installing and removing battery
the handle until the battery securely latched with
Always set the rotational direction switch at
centre position when inserting the battery or
4. Charge state of the battery
1 = Battery 70 - 100% charged
2 = Battery 30 - 69% charged
3 = Battery less than 30% charged
5. Work light
It is convient if you use lighting function when
the light on and press the work light button again
6. Reversing the Rotation Direction
the direction during operation may damage the
loosening of screw)
fastening of screw, drilling)
7. Adjusting the Speed
The power tool switch allows the speed to be
High setting range when working with large screw
overload clutch begins to work to keep the tool
release the switch, it brings the motor to a sudden
It is very convenient for fastening screws in soft
If drill stalls, it is usually because it is being
trigger on and off in an attempt to start a
This makes quick and easy changing of the tool in
9