Felisatti DC10/14,4L2 Manual De Uso página 4

accessories, or storing power tools.
d) Store idle power tools out the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
e) Maintain power
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation. If
damaged, have the power tool repaired before
f) Keep cutting tools sharp and clean.
cutting edges are less likely to bind and are easier
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
from those intended could result in a hazardous
5) Battery tool use and care
by the manufacturer.
A charger that is suitable for one type of battery
designated battery pack.
c) When battery pack is not in use, keep
it away from other metal objects, like paper
clips, coins, keys, nails, screws, or other small
metal objects that can make a connection
from one terminal to another.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If liquid contacts eyes, additionally seek medical
6) Service
a) Have your power tool serviced by a
replacement parts.
This will ensure that the safety of the power tool
4
tools. Check for
and Warnings
rain or when it is wet.
object through the ventilating opening of the
charger.
and keep the charger out of the reach of
children.
damaged, replace or repair it immediately.
If the cord of the charger has been damaged,
replace or repair it immediately.
the terminals of the battery is short circulated,
explosion may occur causing serious injury.
not pierce the battery case with a sharp object.
direct light and closed hot and humid places.
with the drill bit during operation.
position while you are changing or operating
the tool.
Careless operating of the switch may cause a
of the tool tightly before you start operation.
2