General Power Tool Safety - Felisatti DC10/14,4L2 Manual De Uso

It is essential that instruction manual is read
Always keep this instruction manual together with
is with the power tool when it is given to other
Table of Contents
As our engineers are striving for the
constant research and development
to develop the quality of products,
shape or structure of our model can be
changed without previous notice.

General Power Tool Safety

Warnings WARNING! Read all
safety
instructions.
the warning Instructions may result in electric
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive
Atmospheres, such as in the presence of
c) Keep children and bystanders away while
operating a power tool.
2) Electrical safety
a) Power tool plugs must match the outlet.
any adapter plugs with earthed (grounded) power
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
Note
1
warning and
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
e) When operating a power tool outdoors,
3 use an extension cord suitable for outdoor
4 use.
7
f) If operating a power tool in a damp
7
8 location is unavoidable, use residual current
8 device (RCD) protected supply.
8
10 3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool.
operating power tools may result in serious
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting.
switch is in the off position before connecting to
all
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench or
key left attached to a rotating part of the power
e) Do not overreach. Keep proper footing
and balance at all times.
This enables better control of the power tool in
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled with the
c) Disconnect the plug from the power
source and/or the battery pack from the power
tool before making any adjustments, changing
3