Hilti NURON C 6-22 Manual De Instrucciones Original página 23

Status
One (1) LED slow-flashes green
One (1) LED shows green, one (1)
LED slow-flashes green
Two (2) LEDs show green, one (1)
LED slow-flashes green
Three (3) LEDs show green, one (1)
LED slow-flashes green
Four (4) LEDs show green
No LED showing
One (1) LED quick-flashes yellow,
then one or more LEDs show green
One (1) LED quick-flashes red
3.5 Indicators showing the state of health of the Li-ion battery
Hilti recommends checking the state of health of the Li-ion battery every
time before charging.
To check the battery's state of health, press the release button of the battery
and hold it down for longer than three seconds. The system does not detect
a potential malfunction of the battery due to misuse, for example battery
dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly green.
All LEDs show in sequence, fol-
lowed by one (1) LED quick-flashing
yellow.
*2275224*
Meaning
The battery is being charged, state
of charge: ≤ 20 %
The battery is being charged, state
of charge: 21 % to 40 %
The battery is being charged, state
of charge: 41 % to 60 %
The battery is being charged, state
of charge: 61 % to 80 %
The battery is being charged, state
of charge: ≥ 80 %
The battery is fully charged, charg-
ing has ended.
Charging interrupted. The battery
might be outside the permissible
temperature range.
Charging resumes automatically
as soon as the applicable parame-
ters return to specification. If neces-
sary, bring the battery to the recom-
mended charging temperature.
The Li-ion battery is locked and
cannot be used. Consult Hilti Ser-
vice.
Meaning
The battery can remain in use.
The check to ascertain the battery's
state of health did not complete.
Repeat the procedure, or consult
Hilti Service.
2275224 English 17