Wash Cycles And Functions; Table Of Wash Cycles; Wash Functions - Indesit ARTXD 129 Manual De Instrucciones

Wash cycles and functions

Table of wash cycles

Description of the wash cycle
Everyday wash cycles (Daily)
Cotton: extremely soiled whites.
Cotton Standard 60° (1) (1° press of the button): heavily soiled whites
and resistant colours.
Cotton Standard 40° (2) (2° press of the button): lightly soiled whites
and delicate colours.
Cotton Standard 20° (3° press of the button): lightly soiled whites
and delicate colours.
Synthetics (1° press of the button): heavily soiled resistant colours.
Synthetics (3) (1° press of the button): lightly soiled resistant colours.
Synthetics (2° press of the button): lightly soiled whites and delicate colours.
Mix 30' (1° press of the button): to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
Mix 15' (2° press of the button): to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
Special cycles / Memory
Memory: allows for any wash cycle to be stored.
M
Baby cycle: heavily soiled delicate colours.
Silk/Curtains: for garments in silk and viscose, lingerie.
Wool: for wool, cashmere, etc.
Partial wash cycles
Spin (1° press of the button)
Rinse (2° press of the button)
Pump out (3° press of the button)
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle
3) Synthetic program along: set wash cycle

Wash functions

Stain removal
This function is particularly useful for the removal of stubborn stains.
, , , , Spin, Pump out, programmes.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
It cannot be used with the
!
(2° press of the button) with a temperature of 40°C.
(1° press of the button) with a temperature of 40°C.
To run the bleach cycle on
its own, pour the bleach into
compartment 4, set the "Rinse"
programme and activate the
"Stain removal" programme.
To bleach during a wash cycle,
pour in the detergent and any
fabric softener you wish to use,
set the desired wash cycle
and enable the "Stain removal"
function.
It cannot be used with the
!
, , , , , , , programmes.
Detergents
Max. Max.
temp. speed
(°C) (rpm)
Prewash Wash
softener
90° 1200
 
60° 1200 -

40° 1200 -

20° 1200 -

60° 800
 
40° 800
 
40° 800
 
30° 800 -

30° 800 -

40° 800 -

30° 0 -

40° 800 -

- 1200 - -
- 1200 - -
- 0 - -
(1° press of the button) with a temperature of 60°C.
(2° press of the button) with a temperature of 40°C.
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
It cannot be used in conjunction with the
!
out, programmes.
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. The
cycles ends with the laundry being left to soak in the machine; the
EASY IRON and START/PAUSE indicator lights will flash (orange)
and the text "STOP WITH WATER" will appear on the display. To
drain the water so that the laundry may be removed, press the
START/PAUSE button or the EASY IRON button.
It may not be used with the
!
Fast wash
Reduces the duration of the wash cycle, while making it
possible to save water and electricity.
It cannot be used with the
!
Fabric Ble-
ach
- 6 53 1,92 67 160'

6 53 1,04 50,0 165'
 
6 53 1,09 92 160'
 
6 - -
 
3 44 0,85 39 110'
 
3 44 0,53 39 100'
 
3 - -
 
- 3 71 0,25 33

- 1,5 71 0,08 29

2 - -
 
- 1 - -

- 1 - -

- - 6 - -
6 - -
 
- - 6 - -
, Spin, Pump
, , , programmes.
, , , , programmes.
GB
- 180'
- 75'
30'
15'
- 120'
- 55'
- 65'
- 16'
- 36'
- 2'
wash
21