Clearing A Scenario (On The Transmitter); Problems And Solutions - LEGRAND Celiane 672 56 Manual Del Usuario

Clearing a scenario (on the TRANSMITTER)

Clear all scenarios linked to the control button
Press LEARN
Clear all scenarios linked to this product
Press LEARN

Problems and solutions

Problem
The LEARN indicator light switches on
for 5 seconds.
The LEARN indicator light switches on
for 10 seconds.
During the learning phase the LEARN
indicator light does not flash anymore.
The programmed function key does
not work.
When saving the scenario, the LEARN
indicator lights of some receivers
do not switch off.
Press the control button
and hold down for 10 s
Press LEARN and hold
down for 10 s
19
Cause
Learning is impossible.
The number of recorded transmitters
is more than 32.
The learning mode closes after
10 minutes.
(without any action).
After pressing the LEARN button,
learning of the function key starts
immediately.
Faulty communication between
the products.
20
5 s
The scenario is cleared
The product returns
5 s
to factory settings
Solution
Install compatible products.
Clear the unused scenarios.
Reinitiate the learning phase.
Reinitiate the learning phase.
Check the cabling (connection).
Is there any disturbing device ?
If yes, use an insulating filter.