Trueshopping MFS260HT Manual De Montaje página 20

•
Remove the fuel lines from the
carburettor by pulling them off with your
fingers.
•
Next we need to remove the throttle
cable from the carburettor, to do this, Pull
the black plastic housing clockwise as
shown below, this will give some play
allowing the cable to be removed.
•
Using the provided spanner loosen the
cable retaining nut and the cable will fully
detach from the carb.
•
The carburettor is now detached.
*If replacing with a fresh carburettor,
please follow the instruction in reverse
to fit.
*If inspecting only, check that no debris
is evident and that the rubber gasket on
the carburettor is not damaged or
warped.
18