Youin KILIMANJARO BK4000 Manual De Usuario página 22

8. LCD Display
· Switching Push-assist Mode On/Off
To activate the push-assistance function,
short press ON/OFF and hold the DOWN
button between 3S. E-bike is activated with
a uniform speed of 6 km/h while the screen
displays shown " ".
The push-assistance function will be switched
off as soon as you release the DOWN button
and ebike gets back to the status before the
push-assistance is engaged.
· Push-assist function may only be used when pushing the E-bike. Be aware of
danger of injury when bike wheels do not have ground contact while using the
push-assist function.
· Switching Lighting ON/OFF
To switch on bike light, hold the UP button
for 1s. The lighting icon comes out and
display backlight brightness is automatically
reduced. Likewise, hold the UP button for 1s
again, the bike light switches off. The lighting
icon is gone and display resumes backlight
brightness.
· Assist Level Selection
Press UP or DOWN button to switch between the assist levels and change the motor
output power, The default assist level ranges from level "0"to level "5", The output
power is zero on Level "0". Level "1" is the minimum power. Level "5" is the maximum
power.
· Battery Indicator
The default voltage of display battery is 36V. The segmented voltage values are
31.5V-32.5V-34.35V-36.03V-37.48V-39.46V.
22
YOU-RIDE KILIMANJARO