Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Under the MENU, you can setup the mass storage mode/PC camera mode, language, 50Hz/60Hz, EV,
WB, analog video output format (NTSC/PAL), Auto-Off, Date & Time and default.
See following for details.
HOW TO USE FLASHLIGHT
Press the > button, there are 3 modes to switch to: AUTO-FLASH, FLASH and WITHOUT FLASH.
When the flash is charged the TFT auto turn off and power indication LED flickering.
CONNECTED TO PC
Mass Storage Mode (When in use of external memory card)
Set the digital Video to Storage Mode (see the section Setup). After turning the Power Switch to "OFF"
position, you can connect your Digital Video to a computer. It will turn to Mass Storage Mode. In Mass
Storage Mode, your Digital Video acts exactly like a hard disk. That means you can access it via the
Windows user interface.
You can copy, move or delete pictures or movies exactly the way you
manipulate files.
(Note: For Windows ME, 2000 and XP, there is no need to install the mass storage driver from the
CDROM. Driver installation is only needed for Windows 98.
All manuals and user guides at all-guides.com
Pagina 10
PC camera mode
Set the Digital Video to PC Camera Mode (see the section Setup). After turning the Power Switch to
"OFF" position, you can connect your Digital Video to a computer with its supplied USB cable and use it
as a PC camera. With a compatible video capture program, you can capture movies.
INSTALLING THE DRIVER AND PHOTO-EDITING SOFTWARE
You must install all software before connecting the Digital Video to your computer.
(Not Available for MAC)
By connecting your Digital Video to a computer, the Arcsoft opens. Meanwhile your Digital Video
switches to Mass Storage Mode, too. You may choose either to transfer the camera data through
Arcsoft program or through Mass Storage Mode.
a) Click start->program->Arcsoft Camera Suite->Photo Impression 5 to execute Photo Impression 5-
>Click DSC / Scanner -> STK014Camera
b) Select and Click "DSC / Scanner", the diagram will be displayed as follows
c) Click " STK014 Camera", the diagram will be displayed as follows and enter to PC CAM Mode.
d) Taking pictures and downloading Pictures can be operated in above interface
Pagina 11
Tabla de contenido
