Tabla de contenido
Idiomas disponibles
Idiomas disponibles
POWER
Power On/Off
Turn the power knob to activate your Digital Video. Turn it again to turn
this Digital Video off.
If you leave your Digital Video unused for 1 or 3 minutes, the Power will
turn off (You can set the Auto-Off to 1 minute, 3 minutes, or disable this
feature, see the section Setup).
POWER LOW
If your battery is low, you will see a battery icon (
lower left corner of the LCD.
If your battery is about to run out, You will see a blinking battery icon (
) shown on the lower left corner of the LCD, then the digital video
sound beeps and turn off itself in 10 seconds.
CHARGING THE LI BATTERY
Li Battery will be charged when Digital Video is connected to PC by
USB(Press MENU key to select "YES" of USB chargeable setting),
Status LED begin to flicker. If the charge is ok, the status LED will be
on.
All manuals and user guides at all-guides.com
) shown on the
Pagina 4
Modes
TAKING PICTURES / SINGLE SHOT
1. Turn on your digital video power.
2. Press Zoom-in T or Zoom-out W to frame your picture.
3. Press RESOLUTION to set proper image. The LCD will display
your current picture's resolution setting on the lower left corner,
which could be three stars for super resolution (2272x1712), two
stars for fine resolution (1600x1200) or one for normal resolution
(1280x1024).
4. Set focus before taking pictures
5. Press SHUTTER to start
Pagina 5
Tabla de contenido
