Idiomas disponibles
Idiomas disponibles
APPLICATION
Selection of mounting sleeves
A Rubber Bearing / Bushing
B 110 mm Mounting Sleeves (necessary sleeve I.D.= bush + approx. 2 mm)
C 40 mm Mounting Sleeves (necessary sleeve
Work with hydraulic spindle and frame
REMOVE BUSHING
Choose a suitable fixing spindle (the size fits the diameter of
bushing) a short and a long mounting sleeve.
Confirm if the hydraulic spindle and the frame are connected and
then place the connect bush, fixing spindle, short mounting
sleeve, control arm, and the long mounting sleeve in order.
Turn the hydraulic spindle clockwise, and then the whole device
presses the bushing into long mounting sleeve.
The operation is done.
REPLACE A NEW BUSHING
Exchange the position of short and long mounting sleeve.
Turn the hydraulic spindle clockwise, the new bushing will be
pushed into control arm simply.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
O.D.
= bush O.D. – approx. 2 mm)
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
New
Bushing
