Operating Instructions; Product Description - Kunft KTE3782 Manual De Instrucciones

2. OPERATING INSTRUCTIONS

2.1. Product description

STRUCTURE AND PARTS
1. 1 heat setting
2. Overheating protection
3. Digital LCD
4. Room temperature setting
5. Room temperature sensor
6. Digital clock, digital week calendar
7. Multi-operation mode: daily
program mode, weekly program
mode, free use mode
8. Anti-frost function
9. Can be wall-mounted or used on wheels
INSTALLATION
With wheels
1. Fit the feet onto the bottom of the appliance.
2. Fasten the feet with 4 screws.
Wall-mounted
Distance between fixing points
T. EMITTER 4 5
L1 (mm) 242 322
L2 (mm) 242 322
Fig. 2
Out-let
LCD
screen
Steel
housing
Power
switch
Temperature sensor
Fig. 1.
6 7 8
402 482 562
402 482 562
Fig. 3
10
electric radiator 2000W
1. Drill holes according to the
instructions in fig. 2
2. Place the tubes into the holes of
the wall.
3. Set up grips with screws (Fig. 4)
4. Place the T. Emitter on the upper
grips
5. Place the down grips to maintain
the appliance against the wall.
6. Screw grips down with screws.
CAUTION: Before starting the appliance, make sure it's correctly
wall-mounted. If it's not parallel to the floor, technical problems can
occur.
Control panel and LCD screen
Control panel:
There is a total of 5 buttons on the control panel as follows:
Power standby switch
Date and time settings; Timer settings; Running mode
Running mode; Set program;
Increase
Decrease
The screen has a backlight which will automatically turn itself of after
1 minute if no buttons are pressed. It will light up again if you press
any button.
The unit has an auto button lock function. The buttons will be locked
( ) after 1 minute if you don't press any buttons.
To remove the lock: press and
Screen:
1. Clock
2. Date
3. Program name/ number
4. Hour of the day
5. Comfort
6. Economy
7. Anti-frost 11. Program setting
8. Standby 12. Timer
9. Buttons locked 13. Day settings
10. Heating symbol 14. Target temperature
EN
KTE3782
WALL SCREWS GRIPS
TUBES
GRIPS
Fig. 4
at same time.
11