Hama Slim 00173221 Instrucciones De Uso página 2

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Power Pack Slim
• USB charging/connection cable
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating and use
it in dry rooms only.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not drop the product and do not expose it to any major
shocks.
• Do not operate the product outside the power limits given in
the specifications.
• Do not open the device or continue to operate it if it becomes
damaged.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Since the battery is integrated and cannot be removed, you will
need to dispose of the product as a whole. Do this in compliance
with the legal requirements.
• Do not modify the product in any way. Doing so voids the
warranty.
2
All manuals and user guides at all-guides.com
4. Operation
4.1 Charging the Power Pack
• Begin charging the Power Pack by connecting the included USB
• Alternatively, you can charge the Power Pack using a suitable
• Charging begins and ends automatically.
• Charge the Power Pack fully before using it for the first time.
4.2 Charging terminal devices
• Connect the integrated micro-USB cable to the micro-USB port of
• Alternatively, you can connect the included USB charging/
• The included USB charging/connection cable may not be suitable
• To start charging, press the button on the top of the Power Pack.
• The current battery status of your terminal device will appear
• Press the button on the top of the Power Pack to stop charging
charging/connection cable to the Micro USB input on the Power
Pack as well as the USB connection on a PC/notebook.
USB charger. Please refer to the operating instructions for the
USB charger used.
Note – Capacity
• The capacity is always shown when the Power Pack is
charging.
• If all three status LEDs light up, the full capacity is available.
• Press the button on the top of the Power Pack to switch it on
and to check its current capacity.
• Switch the Power Pack off by pressing the button on the
top again.
Warning – Battery
• Only use suitable charging devices or USB connections
for charging.
• As a rule, do not charge devices or USB connections that are
defective and do not try to repair them yourself.
• Avoid storing, charging or using batteries in extreme
temperatures. • When stored over a long period of time, batteries should be
charged regularly (at least every three months).
your terminal device (mobile phone, smartphone, etc.).
connecting cable to the USB port on the Power Pack and to the
micro-USB port on your terminal device.
for the USB connection on your terminal device. In this case, use
the USB cable that was included with your terminal device.
The status LEDs show the remaining capacity when the Power
Pack is charging.
on this device.
and to switch it off. The status LEDs should switch off.