Errors/Alarms - baraldi BEAUTY Instrucciones De Uso

INSTRUCTIONS FOR USE
2.31

Errors/Alarms

When an error is detected, the whole appliance or the heater/s are switched off,
a beep sounds (only if one or more heaters are active) and all displays show a
'F' letter and the error code alternately.
While in error status the keys of the corresponding heaters are not operative.
Except EEPROM and microcontroller errors, all errors are recoverable. That
is, when the cause of the error disappears all displays are deactivated and the
cooktop returns to normal operation.
Fault/Error
(Visualization
Priority Order)
Microcontroller fault
On/Off key emitter fault
On/Off key receiver fault
User interface temperature
sensor short-circuit
User interface temperature
sensor open-circuit
User interface overtemperature
EEPROM fault
Microcontroller A/D converter
multiplexer fault
Ambient Light fault
Microcontroller A/D converter
conversion fault
Communication fault
Heater temperature sensor
short-circuit
Heater temperature sensor
open-circuit
64 / GB
Heater Displays
(fore 0.5 sec./ Efect in the appliance
back 0.5 sec)
F0
FA
FC
FE
Ft
Fc
FH
FJ
FL
FU
F5
F1
F2
Normal status recovery
App. off
When the fault disap-
App. off
When the fault disap-
App. off
When the fault disap-
App. off
When the fault disap-
App. off
When user interface
App. off
App. off
When the fault disap-
App. off
When satisfactory am-
App. off
bient lighting is detected
When the fault disap-
App. off
Heater/s off
Heater/s off
Heater/s off
USE
-------
pears
pears
pears
pears
temperature < T
-------
pears
pears
When the fault
disappears
When the fault
disappears
When the fault
disappears