USE
•
Fast Boil function.
•
Stop & Go function.
•
Independent timer for each heater.
•
Indication of residual heat for each heater.
•
Thermal control protection.
•
Protection from accidental activation of keys:
- One or more keys activated for more than 10 sec. -> Switching off the
touch control. A warning beep sounds every 10 sec., while the key/s is/
are activated.
- With all heaters at zero power during 10 sec. -> The Cooktop is
switched off. If the switching off is due to an accidental activation of
keys, the touch control actuates as above.
•
Acoustic warning to attract the user's attention.
•
Pan detection for induction heaters; After 60 sec. with no pan, the hea-
ter switches off.
INFRARED KEYS
•
1 key for switching On/Off the Cooktop [ON_OFF_KEY].
•
1 key for locking/unlocking the keyboard [KEYLOCK_KEY].
•
1 key for Stop & Go function [STOP_GO_KEY].
•
2 key for timer timeset [-TIMER_KEY] [+TIMER_KEY].
•
5 keys for heater selection [HEATER_n_KEY] n=0..5
•
1 Infrared slider key [SLIDER] for heater cookset selection.
DISPLAYS AND LEDS
•
5 7 segment displays to show the heaters setting.
•
2 7segment displays and 5 LED-s to show the timer setting.
•
1 LED to show if the cooktop is locked/unlocked.
•
1 LED to show if the Stop & Go function
•
1 Bargraph LED to show the selected power for the selected heater.
SOUNDs
-
3 beeps for switching Off the Cooktop [OFF_SOUND].
-
2 beeps for activating Stop&Go function [STOP&GO_SOUND].
-
Slider sound when the cookset is changed.
Fig. 3 - Switching ON the cooktop
INSTRUCTIONS FOR USE
43 / GB