Maintenance; Storage; Declarations On Mechanial Vibrations; Spare Parts - Sima ATA 450 Li-ion Manual De Instrucciones

9 MAINTENANCE

When the tying gun Works for long hours, the metal dust and wire shavings can easily get into
sensitive areas of the machine, such as the jaws, the cutting blade and the feeding gears. Check
the rebar tying gun on a regular basis, clean the feeding gears, jaws and surrounding areas with a
brush, air blow gun or vacuum cleaner.
Do NOT lubricate the rebar tying gun at all. This may seriously damage the tool and electronics.

10 STORAGE

The RE-BAR tier must not be stored in cold conditions. It should be kept at approx. 20°C. When the machine is not in
use, it should be stored under warm and dry conditions. Keep the machine out of the reach of children.

11 DECLARATIONS ON MECHANIAL VIBRATIONS

The machine does not present any source of mechanical vibrations that cause risks to the health or safety of the ope-
rator.

12 SPARE PARTS

The spare parts for the bending and combined machines are to be found in the spare parts plan, attached to this ma-
nual. To order any spare part, please contact our alter-sales service clearly indicating the serial number of the machi-
ne, model, manufacturing number and year of manufacturing that show on the characteristics plate.

13 ENVIRONMENT PROTECTION

Raw materials have to be collected instead of throwing away residuals. Instruments, accessories,
fluids and packages have to be sent into specific places for ecological reutilisation. Plastic compo-
nents are marked for selective recycling.
R.A.E.E. Residuals arising of electrical and electronic instruments have to be stored into specific
places for selective collection.
ENG
13