Maintenance - LaPiccola SARA Manual De Instrucciones

COFFEE / TEA DELIVERY
- Lift the pod - holder by moving up the lever
- Place the pod in the holder making sure it is in the middle
- Pull down the lever with strenght to close the pod - holder
- Check that the pilot light of the coffee temperature is switched off
- Push the coffee dispensing button
spensing.
- After the dispensing pull up the lever and dispose of the used pod immediatly
another coffee.
CAPPUCCINO DELIVERY
- Turn on the steam switch button on the front panel
- Wait for the steam temperature led to be turned off
- Put the steam nozzle in a container.
- Push the steam delivery switch
- Wait a few minutes before you remove the cup.

MAINTENANCE

- Be sure the plug is not connected to the socket and the machine is cool, before you make any maintnance action.
- If you have to fill the water tank up, be sure the delivery switch and main switch are turned off. Disconnect plug from the
socket, then fill the water tank up.
- If the machine doesn' t deliver anything after the delivery button is on, turn off the machine, disconnect the plug from the
socket and check the water level in the water tank.
- Clean the machine after using it, don' t use solvents, alchool, petrol or anything else can damage the machine surface.
- The machine has a filter on the water tank, replace it almost once every year.
- The machine has a water drops collector tank under the surface of cup place. Clean it every time you use the machine.
- Empty the water tank if you don' t use the machine for long time.
- If you didn' t use the machine for long time, t is advisable to clean the main components by making a "throw away" coffee
and dispensing some hot water, before use it..
- Check the plug very often. If it is damaged don' t use the machine nad call assistance service.
- Clean the machine regularly (sanitation/descaling). The best way to do this (see paragraph "DESCALING AND SANITA-
TION") is using our "laPiccola" professional descaler.
2).
(Drwg.
(Dwg.
(Drwg. 3); once you reach the required amount, push the same button to stop the di-
(Drwg.
(Drwg. 4).
4); when you get the right amount push the button to be stopped.
(Drwg.
2).
(Drwg. 3).
3).
(Drwg.
(Drwg.
1-B).
5). The machine is ready to make
21