The dishes are not clean.
Cloudiness on glassware.
White spots appear on
dishes and glasses.
Black or grey
marks on dishes
Detergent left in dispenser
The dishes aren't drying
The dishes aren't drying
Not enough detergent
was dispensed.
Items are blocking the
movement of the spray arms.
The filter combination is not
clean or is not correctly fitted in
the base of wash cabinet.
This may cause the spray
arm jets to get blocked.
Combination of soft water and
too much detergent.
Hard water area can cause
limescale deposits.
Aluminium utensils have rubbed
against dishes.
Dishes block detergent
dispenser.
Improper loading
Dishes are removed
too soon
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
59
Use more detergent, or change
your detergent.
Rearrange the items so that the
spray can rotate freely.
Clean and/or fit the filter
correctly. Clean the spray
arm jets.
Use less detergent if you have
soft water and select a shorter
cycle to wash the glassware
and to get them clean.
Check water softener settings
or fill status of salt container.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Use gloves if detergent residue
can be found on dishes to
avoid skin irritations.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.
With a short program, the
washing temperature is lower,
decreasing cleaning
performance. Choose a
program with a long washing
time.
Water drainage is more difficult
with these items. Cutlery or
dishes of this type are not
suitable for washing in
the dishwasher.