Battery And Charging - HITWAY BK6 Manual De Instrucciones

Ocultar thumbs Ver también para BK6:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
ATTENTIONS

Battery and charging:

Charge at 0℃~45℃, discharge at -20℃~60℃, keep the battery dry. Do not put the battery
in acidic or alkaline liquid. Avoid rain and keep away from fire, heat and high temperature
environment. It is strictly forbidden to connect the positive and negative poles of the battery
reversely. It is strictly forbidden to damage,disassemble the battery or cause short-circuit.
Please use the specific original charger for
charging, with charging time no more than 6 hours and the charging current no larger than 2
A. When not in use for a long time, please store the battery in a cool and dry place, and
charge the battery for five hours every month. The user must follow the manual instructions
when charging, otherwise the consequences will be at his own risk. Pay attention to the
battery type and applicable voltage that the
charger can charge, and it is strictly forbidden to mix. When charging, it should be placed in
a ventilated environment. It is strictly forbidden to charge in residential buildings, enclosed
spaces, or under sunshine and in high temperature environments. When charging, plug in
the battery first, then connect to power supply socket; after charge gets full, cut off the
socket first, and then unplug the battery. When the green light is on, the power supply should
be cut off in time, and it is forbidden to connect the charger to the AC power supply for a long
time without charging. During the charging process, if the indicator light is abnormal, there is
a peculiar smell, or the charger casing is overheated, stop charging immediately, and
repair or replace the charger. During the use and storage of the charger, pay attention to
avoid foreign objects entering, especially water or other liquids, so as to avoid a short circuit
inside the charger. The charger should not be carried with the car as much as possible. If it
is necessary to carry it, it should be placed in the toolbox after the shock absorption
treatment is done. Do not disassemble or replace the accessories in the charger by yourself.
Ride:
Do not use it until you read the instructions carefully and understand the performance of the
product; do not lend it to people who can't manipulate the product for riding. Before riding the
bicycle, check whether the brakes are working. When you brake, please activate the rear
brake firstly, and then the front brake. Pay attention to the brake tightness. If the brake is too
loose, use an Allen key to tighten it. Pay attention to increasing the braking distance when
riding in rain or snow. Suitable age:
Riding between 16 and 65 years old.
Please be sure to wear a safety helmet when riding a bicycle, follow the traffic rules, and do
not drive on motorized lanes and roads with many pedestrians. Please check the tire
pressure before riding. The recommended tire pressure is 35~40 PSI.
When riding on downhill and non-paved roads, make sure the speed do not exceed 15KM/h.
When using the motor, please be careful not to hit it vigorously and keep the rotating shaft
(1)
English
/ German / French / Spanish / ltalian / Dutch
Tabla de contenido
loading

Tabla de contenido