soil type. It is strongly recommended the use of an automatic controller for regulating the
amount of water is applied to plants recommended.
5. ADDING EXTRA PANELS
It is simply a matter of adding additional panels. Once you have installed the first panel can be
added to the sides, top or bottom. It is important that the edges of the two panels are aligned.
Use a double adapter (supplied) to attach them to the quick connector of the new panels. Click
the panel assembly and then slide the next panel.
NOTE - The connection is made through a quick connector with stop valve incorporated.
Sometimes waste residues can affect the valve seat causing a leak. If this happens push the
valve with a screwdriver to clean the waste remains.
6. CHECKING WATERING SYSTEM
It is essential to irrigation system at regular intervals. Because the Green Wall has small pots
that can dry rapidly.
The emitters should be checked to ensure that the same amount of water flowing from every
dripper. A filter is very important to ensure that the water is clean and droppers do not become
blocked. Keep the filter clean for which water flows through the system properly.