Bricomed Green Wall Manual Del Usuario página 14

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

 
 
 
 
4) Use a 6.5mm drill to drill three holes. Then insert the plastic anchors provided. 
Attach the stainless steel wall with stainless steel screws provided. 
  
 
5) Hang the panel on the steel bracket. 
  
6) Once the panel or group of panels is mounted on the wall and the way the irrigation is 
interconnected (if you have more than one panel) so now you must connect the water system 
panel and verify that the main irrigation line is connected correctly (no significant leakage) and 
all the emitters are operating at a speed similar output. They should have a constant drip rate. 
If some emitters are not working well, then you can unscrew or loosen a little dropper cap. 
 
Remember to connect the pressure reducer and filter at the tap outlet. It is very important to 
keep the water supplied to the droppers clean dirt and dust. 
 
7) Ground hanging baskets before connecting them to the panel. See notes below in pots. 
  
8) Hang pots on the panel. Each pot has a flat hook at the back. This slides into a slot in the 
panel. The groove is wider than the hook and this allows some movement by placing the pots. 
Once the pot is in place the most critical step is to position the dropper in the center. Each 
dropper has a pickaxe to secure it in the ground and this allows you to anchor the issuer in the 
right place. 
  
9) If you are going to grow a mixture of plants in the Green Wall, then it should be noted that 
the top row is the best for growing taller plants. For middle and lower ranks better to choose 
plants with a habit of flat growth or even hanging plants. 
  
10) Place the drip trays under the pots if you want to collect excess water. The drip trays have 
a threaded outlet where you can screw an adapter to connect to the pipe or garden hose to get 
water. 
  
11) Once the plants are in place to connect a hose to a faucet and click on any of the four entry 
points on the panel. Turn on the water and check the water system is working well or if there is 
any leakage. 
  
12) Water the plants with the required regularity. As a rule, the soil surface should dry out 
between waterings. Irrigation requirements vary as determined by the weather, the plant and 
Tabla de contenido
loading

Tabla de contenido