Tabla de contenido
Idiomas disponibles
Idiomas disponibles
-
2, backlight will switch on automatically when a weight is put on a pan
• Scale capacity selection: C=0:30kg ; C=1:60kg ; C=2:120kg ; C=3:150kg ; C=4:180kg
CALIBRATION
-
The display will show "CAL=0" for 2 seconds, then the ADC code. Ensure that the weighing
pan is empty.
-
Press the
-
The display will show "CAL=1" for 2 seconds, then the ADC code. Place the calibration
weight on the weighing pan (20kg for model DT-60 or 40kg for model DT-120)
-
Press the
-
The display will show "CAL=2" for 2 seconds, then the ADC code. Place the calibration
weight on the weighing pan (40kg for model DT-60 or 80kg for model DT-120)
-
Press the
-
The display will show "CAL=3" for 2 seconds, then the ADC value. Place the calibration
weight on the weighing pan (60kg for model DT-60 or 120kg for model DT-120)
-
Press the
When "PASS" be displayed several seconds later and the scale will turn itself off, indicating the
calibration has been completed. The above instruction is three-point calibration.
MESSAGES
« EEEEE » with alarm sound, means the balance has been overloaded.
« ----------« Exceed the range, the balance will automatically turn off.
UNST,
Exceed the time (20s) for stabilitation.
"Lo.bAt"
Low battery (under 4.4V), the balance will automatically turn off.
« EEP.Er» Wrong parameter E2PROM
GUARANTEE
This scale is guaranteed for one year from the delivery date. Te guarantee covers any fabrication
defect of the material.
During this period GRAM PRECISION, covers the manpower and the spare parts necessary for the
reparation of the scale.
This guarantee does not cover the failures caused by an inappropriate use or overcharge.
The guarantee does not cover the freight cost (transport) necessary to repair the scale.
key to confirm the calibration of the zero-point.
key to confirm the first calibration.
key to confirm the second calibration.
key to confirm the third calibration.
6
Tabla de contenido
