Inground Spa Installation - Catalonia Aqua Spa Manual De Instalación

INSTALLATION AND ASSEMBLY

3.6. INGROUND SPA INSTALLATION

The Spa structure must be fixed on the floor. Do not hold the Spa by its outer edges.
Min. 10mm
Once settled the Spa, finish the work bearing in mind that the edging of the surface must not be in
direct contact with the work (a minimum of 1 cm must be left around the edge).
Bear in mind that you will have to leave enough space to access to the pumps and electrical
connections for maintenance. This space should be at least of 0.7 meters.
To seal the tab to the Spa, use a special elastic silicone for aquatic installations.
700 mm
IMPORTANT
Leave a trapdoor spa access for maintenance.
Never cover with concrete.
LEAVE 70cm CLEARANCE AROUND THE SPA.
ENG
700 mm
11