Horizon Global CQT76194 Instrucciones De Instalación página 4

1. Fascia and bumper beam removal – Use T20 star driver to remove (4) screws from bottom
fascia and (5 on XC90, 7 on XC60) screws from wheel well each side. Open the trunk (XC60
remove the bump stops) and gently remove the fascia. Unplug (2 on XC90, 1 on XC60) wirings
from the fascia and carefully set the fascia aside. Use 15mm socket to remove (3) flange nuts
from bumper beam each side and then remove bumper beam. Set the bumper beam and
fasteners aside carefully. NOTE: Some models might have (4) flange nuts on bumper beam
each side.
2. Heat shield trimming – Trim the area on the heat shield as shown in Figure 3.
5''
4''
3''
©2017, 2018 Horizon Global™ Corp. - Printed in Mexico
5''
4''
3''
4''
3. Bend Fascia Mounting Tabs- On the XC90 skip this step. On the XC60 gently bend the fascia
mounting tabs like Figure 4 allowing clearance for the hitch.
Sheet 4 of 15 76194NP 2-28-18 Rev. B