General Information - cemp F Serie Manual De Instrucciones

1.

General information

1.1 Series F motors
1.1 Series F ATEX motors
The motors offered in this catalogue
comply with standards concerning
equipment and protective systems intended
for use in potentially explosive atmospheres,
in compliance with European Directive
94/9/EC dated 23/3/94, otherwise known as
the ATEX directive.
GB
The ATEX directive states that two different
certificates of conformity are to be issued.
Table 1 A - The series F ATEX
Version
Single speed, three phase
(2, 4, 6, 8 poles)
Three-phase, 1-speed,
unventilated
(2, 4, 6, 8 poles)
Two speeds, three phase
(2/4, 4/6, 4/6, 4/8 poles)
(constant-torque)
Two speeds, three phase
(2/4, 4/8, 4/6, 6/12 poles)
(quadratic-torque)
Three-phase, 1-speed,
with brake
(2, 4, 6, 8 pôles)
Single phase,
(2, 4, 6 poles)
(*) For minimum overheating, the temperature class is indicated in chap. 4 (Performance data).
Table 1 B - Customizable temperature class (referred to an ambient temperature of 40°C)
Frame size
56 - 80
(*) For single and three-phase, 2-speed motors: power lower than T4, unless otherwise specified in
chap. 4.1.
8
One is the "EC Standard type" for the
homologation of the prototype and the other
is for the "Production Quality Assurance".
The Certificates are issued by the
Laboratoire Central des Industries
Electriques (L.C.I.E) (Notified Body
no. 0081).
The conformity certificate numbers are listed
in the performance data.
Frame size Output range
[mm] (2 pole)
[kW]
63 - 80 0,12 - 1,50
56 - 80 0,06 - 0,55
63 - 80 0,25 - 0,75
63 - 80 0,25 - 1,10
63 - 80 0,12 - 1,10
56 0,06 - 0,08
63 - 80 0,12 - 0,75
T5
Same power as T4 (*)
The production quality Guarantee certificate
number is:
LCIE 00 ATEX Q8007.
Temperature
class (*)
IIB
F-BTV
T5 / T6
F-BST
T4
F-BTV
T4
F-BTV
T4
F-BTVF
T4
F-BM
T4
F-BMV
T6
Power lower
Series
IIC
F-CTV
F-CST
F-CTV
F-CTV
F-CTVF
F-CM
F-CMV