Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Converting to a different gas type
Gas regulator
For use with a gas pressure regulator as
shown below. The regulator supplied can
be set for either LP gas or Natural gas.
Pressure
Regulator
shows
Direction of
Gas Flow
Converting the regulator
between NG & LP
1
Unscrew the cap from the regulator.
2
Check the orientation of the plastic
conversion plug, and if necessary, unscrew,
turn over and screw back in (wide section
away from cap for LP and against cap for
NG - see diagram below for appropriate
orientation).
LP
Cooktop
To Cooktop
Regulator
Solid or Flexible
Connector
Shut-Off
Valve
Pipe Stub from
House supply
3
Replace regulator cap.
4
Test gas pressure (test point provision on
side of regulator). When converting the
regulator for different settings, the function
of the regulator must be checked at a
pressure at least 1" WC (0.036 p.s.i.) above
the specified manifold pressure.
NG
EN
7
Tabla de contenido
