Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Clearances
a
36" = Minimum horizontal distance between overhead cabinets installed on either side of
this appliance.
b
30" = Minimum clearance from combustible surface centered above the cooktop.
c
13" = Maximum overall depth of overhead cabinetry.
d
18" = Minimum clearance from countertop to overhead cabinetry.
e
1
1
/
" = Minimum clearance from cooktop to the left side wall.
2
f
1" = Minimum clearance from cooktop to the right side wall.
g
1
1
/
" = Minimum clearance from cooktop to the rear wall.
4
h
1
1
/
" = Minimum distance from front edge of counter to front edge of appliance. Where this
4
reduces the distance between the back edge of the appliance and the adjacent wall to less
than the minimum of 1
i
5
3
/
" = Minimum clearance below countertop to any combustible surface.
16
j
30" = Maximum distance to nearest grounded power outlet from the center of the cooktop.
The power cord must not touch any hot metal surfaces.
Non-combustible material
Recommended non-combustible materials are:
with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminium or 0.020" (0.5 mm) copper.
a
b
g
i
h
e
1
/
" , this wall must be of non-combustible material (see note below).
4
c
d
j
f
1
/
"" (6 mm) flame retardant millboard covered
4
EN
5
Tabla de contenido
