Rockwell RK2516 Manual De Instrucciones página 7

Multi-PurPose saw
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. if damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits
etc., in accordance with these instructions
and in the manner intended for the particular
type of power tool, taking into account
the working conditions and the work to be
performed. use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) use clamps or another practical way to
secure and support the workpiece to a stable
platform.
i) Holding the work by hand or against your
body leaves it unstable and may lead to loss
of control.
5. Battery tool use aND care
a) recharge only with the charger specified by
the manufacturer. a charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) use power tools only with specifically
designated battery packs. use of any other
battery packs may create a risk of injury and fire.
c) when battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) under abusive conditions, liquid may be
ejected from the battery; avoid contact. if
contact accidentally occurs, flush with water.
if liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
6. service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
warNiNG: some dust created by power
sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known to the state of california to cause cancer,
birth defects or other reproductive harm. some
examples of these chemicals are:
• lead from lead-based paints.
• crystalline silica from bricks and cement and
other masonry products and.
• arsenic and chromium from chemically-
treated lumber.
your risk from these exposures varies, depending
on how often you do this type of work. to reduce
your exposure to these chemicals: work in a
well ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
aDDitioNal saFety rules For
your tool
1. always wear a dust mask.
2. Hold power tool by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3. use clamps or another practical way to secure
and support the workpiece to a stable platform.
holding the work by hand or against your body leaves
it unstable and may lead to loss of control.
eNG
7