Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Multi-PurPose saw
MaiNteNaNce
your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
trouBlesHootiNG
symptom
The tool suddenly
Over load
stops during
battery temperature too high
operation.
Low battery capacity
Possible causes
your power tool. Wipe clean with a dry cloth. always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your
power tool.
Possible solution
Relieve the load on the machine immediately and allow
cooling for approx. 30 seconds at the highest no-load speed.
Charge the battery pack.
eNG
11
Tabla de contenido
Solución de problemas
