Yamaha PORTATONE PSR-620 Manual De Instrucciones página 103

Tabla de contenido
d'implémentation / Gráfico de implememtación
*1 PSR-620 ordinarily functions as 16 MIDI channel multi-timbral tone
generator controlled by MIDI reception data. Panel voices and the
other panel settings are not affected by the MIDI message, except-
ing the followings:
MIDI Master Tuning
System Exclusive Message for controlling Reverb, Chorus and
Dsp
The Remote Channel can be designated by the panel settings. The
designated channel on the PSR-620 can be controlled by an exter-
nal device and receive all the data excepting the following control
change data:
Data entry, MSB, LSB
Portamento control
Data increment
Data decrement
NRPN LSB, MSB
RPN LSB, MSB
*2 Bank Select MSB
The bank select MSB is used for melody voice and rhythm voice
switching.
MSB 00H: Melody voice.
MSB 7FH: Rhythm voice.
Transmission: Transmitted when changing the voice, style and
song.
Reception: All channels except10 channel receive this message.
( 10 channel is fixed at rhythm voice.). But when 10 channel is set
for the remote channel or receives XG System On message, 10
channel receives this message and the rhythm voice can change
to the melody voice.
Bank Select LSB
This message is used to correspond to the panel voice numbers
higher than 128.
Bank Select LSB=00H: program change numbers 0~127 corre-
spond to the panel voice numbers 1~128.
Bank Select LSB=01H: program change numbers 0~12 corre-
spond to the panel voice numbers 129~141.
Transmission: Transmitted when changing the voice, style and
song.
Reception: This message can be received only at the channel
designated as the remote channel or the panel voice.
No voice change will occur when only a bank select is received.
When a program change is received the latest bank select value is
used.
*3 These Control Change messages are not transmitted by the PSR-
620 panel operation, but may be transmitted by the accompani-
ment style playing.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
*4 NRPN transmission/reception
The following parameters are supported.
NRPN
Data entry
MSB LSB
MSB LSB
Parameter Name/Range
01H 08H
mmH - -
Vibrato Rate
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 09H
mmH - -
Vibrato Depth
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 0AH
mmH - -
Vibrato Delay
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 20H
mmH - -
Filter Cutoff Freq.
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 21H
mmH - -
Filter Resonance
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 63H
mmH - -
EG Attack Time
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 64H
mmH - -
EG Decay Time
mm : 00H - 40H - 7FH (-64 - 0 - +63)
01H 66H
mmH - -
EG Release TIme
mm: 00H - 40H - 7FH (-64 - 0 - +63)
14H rrH
mmH - -
Drum Filter Cutoff Freq.
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
15H rrH
mmH - -
Drum Filter Resonance
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
16H rrH
mmH - -
Drum EG Attack Rate
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
17H rrH
mmH - -
Drum EG Decay Rate
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
18H rrH
mmH - -
Drum Instrument Pitch Course
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
19H rrH
mmH - -
Drum Instrument Pitch Fine
rr: drum instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63)
1AH rrH
mmH - -
Drum Instrument Level
rr: drum instrument note number
mm: 00H - 7FH (0 - 127)
1CH rrH
mmH - -
Drum Instrument Panpot
rr: drum instrument note number
mm: 00H - 40H - 7FH (L - Center - R)
1DH rrH
mmH - -
Drum Instrument Reverb Send Level
rr: drum instrument note number
mm: 00H - 7FH (0 - 127)
1EH rrH
mmH - -
Drum Instrument Chorus Send Level
rr: drum instrument note number
mm: 00H - 7FH (0 - 127)
1FH rrH
mmH - -
Drum Instrument DSP Send Level
rr: drum instrument note number
mm : 00H - 7FH (0 - 127)
Data entry LSB is ignored.
*5 RPN transmission/reception
The following parameters are supported.
RPN
Data entry
MSB LSB
MSB LSB
Parameter Name/Range
00H 00H
mmH - -
Pitch bend Sensitivity
mm: 00H - 02H - 0CH (0 - 2 - 12)
00H 01H
mmH - -
Fine Tuning
mm: 00H - 40H - 7FH (-64 - 0 - +63)
00H 02H
mmH - -
Course Tuning
mm: 00H - 40H - 7FH (-64 - 0 - +63)
7FH 7FH
- -
- -
RPN Null
Clears current RPN and NRPN number settings.
Data entry LSB is ignored.
*6 Not transmitted when Song and Accompaniment is playing.
*7 Pitch Bend, modulation, expression, sustain, sostenuto and
softpedal are returned to their defult values.
Clears current RPN and NRPN number settings.
Resets portament source note number.
*8 129~141 voice numbers are selectable through an appropriate
Bank Select setting (Refer to *2).
*9 When the External Clock is turned ON by PSR-620 panel setting,
Clock, Start/Stop message will be received.
The start/stop of the song recording and playback will be controlled
by the external device. The initial set up data is transmitted before
the song playback, so that the start may be delayed.
Default
40H
40H
40H
40H
40H
40H
40H
40H
40H
40H
40H
40H
40H
40H
Depends on note
Depends on note
Depends on note
Depends on note
7FH
Default
02H
40H
40H
- -
101
Tabla de contenido
loading

Tabla de contenido